Hits ?▲ |
Authors |
Title |
Venue |
Year |
Link |
Author keywords |
12 | T. Muthuramalingam 0001, S. Vasanth, L. Ganesh Babu, D. Saravanakumar 0002, P. Karthikeyan |
Flushing Pressure Automation for Efficient Machining in EDM Process. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICCMA ![In: 7th International Conference on Control, Mechatronics and Automation, ICCMA 2019, Delft, The Netherlands, November 6-8, 2019, pp. 232-236, 2019, IEEE, 978-1-7281-3787-2. The full citation details ...](Pics/full.jpeg) |
2019 |
DBLP DOI BibTeX RDF |
|
12 | Tzyy-Chyang Lu, Shyh-Leh Chen |
An optimal Bezier transition algorithm for high-speed machining of linear tool paths. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICARM ![In: 4th IEEE International Conference on Advanced Robotics and Mechatronics, ICARM 2019, Toyonaka, Japan, July 3-5, 2019, pp. 521-528, 2019, IEEE, 978-1-7281-0064-7. The full citation details ...](Pics/full.jpeg) |
2019 |
DBLP DOI BibTeX RDF |
|
12 | Jiahe Niu, Chongdang Liu, Linxuan Zhang, Yuan Liao |
Remaining Useful Life Prediction of Machining Tools by 1D-CNN LSTM Network. ![Search on Bibsonomy](Pics/bibsonomy.png) |
SSCI ![In: IEEE Symposium Series on Computational Intelligence, SSCI 2019, Xiamen, China, December 6-9, 2019, pp. 1056-1063, 2019, IEEE, 978-1-7281-2485-8. The full citation details ...](Pics/full.jpeg) |
2019 |
DBLP DOI BibTeX RDF |
|
12 | Ben Euzair |
Advanced Geometric Methods in Machining and Additive Manufacturing. ![Search on Bibsonomy](Pics/bibsonomy.png) |
|
2019 |
RDF |
|
12 | Arindam Majumder, Argha Das, Pankaj Kr. Das |
A standard deviation based firefly algorithm for multi-objective optimization of WEDM process during machining of Indian RAFM steel. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Neural Comput. Appl. ![In: Neural Comput. Appl. 29(3), pp. 665-677, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Hu Xiao, Jipeng Zhao, Xiaoqiang Shi, R. A. Gilbert |
Application of a new geometric modeling on machining cutting chatter analysis. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Intell. Fuzzy Syst. ![In: J. Intell. Fuzzy Syst. 35(4), pp. 4071-4081, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Adil Baykasoglu, Fehmi Burcin Ozsoydan |
Minimisation of non-machining times in operating automatic tool changers of machine tools under dynamic operating conditions. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Prod. Res. ![In: Int. J. Prod. Res. 56(4), pp. 1548-1564, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Cong He, Zailin Guan, Lei Yue, Saif Ullah |
Set-partitioning-based heuristic for balancing and configuration of automated flexible machining line. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Prod. Res. ![In: Int. J. Prod. Res. 56(9), pp. 3152-3172, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Wenbo Wu, Zhengdong Huang, Qinghua Liu, Lianhua Liu |
A combinatorial optimisation approach for recognising interacting machining features in mill-turn parts. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Prod. Res. ![In: Int. J. Prod. Res. 56(11), pp. 3757-3780, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Ronghua Meng, Yunqing Rao, Yun Zheng, Dezhong Qi |
Modelling and solving algorithm for two-stage scheduling of construction component manufacturing with machining and welding process. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Prod. Res. ![In: Int. J. Prod. Res. 56(19), pp. 6378-6390, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Shi Wu, Yangyang Wang, Xianli Liu, Hairui Liu, Li Xu |
Effects of the comprehensive stiffness performance of the impeller processing system on the machining error. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 13(2), pp. 151-167, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Johanna Senatore, Frédéric Monies, Walter Rubio, Laurent Tapie, Kwamiwi Mawussi |
Analysis of the twist of ruled surfaces: application to strip machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 13(1), pp. 26-48, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Dipesh Popli, Meenu Gupta |
Investigation of machining rate and roughness for rotary ultrasonic drilling of Inconel 718 alloy with slotted diamond metal bonded tool. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 13(1), pp. 68-95, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Munmun Bhaumik, Kalipada Maity |
Experimental investigation and finite element simulation of AISI 304 during electro discharge machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Model. Simul. Sci. Comput. ![In: Int. J. Model. Simul. Sci. Comput. 9(4), pp. 1850022:1-1850022:15, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Yongxiang Li, Xiaoping Lu, Cong Yu 0007, Haixia Guo, Dan Zhang |
Research and application of the virtual simulation system teaching method in NC machining course. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Model. Simul. Sci. Comput. ![In: Int. J. Model. Simul. Sci. Comput. 9(1), pp. 1850007:1-1850007:17, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Shankar Chakraborty, Partha Protim Das, Vidyapati Kumar |
Application of grey-fuzzy logic technique for parametric optimization of non-traditional machining processes. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Grey Syst. Theory Appl. ![In: Grey Syst. Theory Appl. 8(1), pp. 46-68, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Fusaomi Nagata, Keigo Watanabe, Maki K. Habib |
Machining robot with vibrational motion and 3D printer-like data interface. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Comput. ![In: Int. J. Autom. Comput. 15(1), pp. 1-12, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Ying Xiang, Rong Mo, Hu Qiao |
Change and Maintenance Method for 3D Machining Procedure Model Based on Design Structure Matrix. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Pattern Recognit. Artif. Intell. ![In: Int. J. Pattern Recognit. Artif. Intell. 32(5), pp. 1855006:1-1855006:24, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Xiaoxia Li, Weidong Li 0001, Fazhi He |
A multi-granularity NC program optimization approach for energy efficient machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Adv. Eng. Softw. ![In: Adv. Eng. Softw. 115, pp. 75-86, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jieqiong Lin, Dongpo Zhao, Mingming Lu, Allen Yi |
Modeling and Analysis of a Novel Decoupled Vibration-Assisted Swing Cutting System for Micro/Nano-Machining Surface. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Access ![In: IEEE Access 6, pp. 70388-70396, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Elango Natarajan, Varadaraju Kaviarasan, Wei Hong Lim, Sew Sun Tiang, Teng Hwang Tan |
Enhanced Multi-Objective Teaching-Learning-Based Optimization for Machining of Delrin. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Access ![In: IEEE Access 6, pp. 51528-51546, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jing Wang 0111, Ming Luo 0005, Dinghua Zhang |
A GPU-Accelerated Approach for Collision Detection and Tool Posture Modification in Multi-Axis Machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Access ![In: IEEE Access 6, pp. 35132-35142, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Kang He, Zhuanzhe Zhao, Minping Jia, Conghu Liu |
Dynamic Bayesian Network-Based Approach by Integrating Sensor Deployment for Machining Process Monitoring. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Access ![In: IEEE Access 6, pp. 33362-33375, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | I. Iglesias, J. E. Ares, Cristina González-Gaya, Felipe Morales Camprubí, Víctor Francisco Rosales Prieto |
Predictive Methodology for Dimensional Path Precision in Robotic Machining Operations. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Access ![In: IEEE Access 6, pp. 49217-49223, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Mohammad Asjad, Faisal Talib |
Selection of optimal machining parameters using integrated MCDM approaches. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Adv. Oper. Manag. ![In: Int. J. Adv. Oper. Manag. 10(2), pp. 109-129, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Li Chen 0010, Ke Xu 0007, Kai Tang 0001 |
Optimized sequence planning for multi-axis hybrid machining of complex geometries. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Comput. Graph. ![In: Comput. Graph. 70, pp. 176-187, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Abid Imran, Byung-Ju Yi |
A Closed-Form Analytical Modeling of Internal Impulses With Application to Dynamic Machining Task: Biologically Inspired Dual-Arm Robotic Approach. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Robotics Autom. Lett. ![In: IEEE Robotics Autom. Lett. 3(1), pp. 442-449, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Kang Cui, Wenhu Wang, Ruisong Jiang, Dezhong Zhao |
Model reconstruction in adaptive machining for near-net-shape rolling compressor blades. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(2), pp. 138-151, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Honghui Wang, Xun Xu 0001, Chengrui Zhang, Tianliang Hu |
A hybrid approach to energy-efficient machining for milled components via STEP-NC. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(4-5), pp. 442-456, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Wei Ji 0005, Lihui Wang 0001, Azadeh Haghighi, Mohammad Givehchi, Xianli Liu |
An enriched machining feature based approach to cutting tool selection. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(1), pp. 1-10, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Guanghui Zhou, Ce Zhou, Qi Lu, Changle Tian, Zhongdong Xiao |
Feature-based carbon emission quantitation strategy for the part machining process. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(4-5), pp. 406-425, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Somnath Das, P. Mazumder, B. Doloi, B. Bhattacharyya |
Fabricating tool for ultrasonic machining using reverse engineering. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(3), pp. 296-305, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Hongcheng Li, Haidong Yang, Huajun Cao, Chengjiu Zhu |
State space modelling carbon emission dynamics of machining workshop based on carbon efficiency. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Integr. Manuf. ![In: Int. J. Comput. Integr. Manuf. 31(4-5), pp. 426-441, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Sen Jiang, Yingguang Li, Changqing Liu |
A non-uniform allowance allocation method based on interim state stiffness of machining features for NC programming of structural parts. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Vis. Comput. Ind. Biomed. Art ![In: Vis. Comput. Ind. Biomed. Art 1, pp. 1-10, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Qiang Cheng, Hongwei Zhao, Yongsheng Zhao, Bingwei Sun, Peihua Gu |
Machining accuracy reliability analysis of multi-axis machine tool based on Monte Carlo simulation. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Intell. Manuf. ![In: J. Intell. Manuf. 29(1), pp. 191-209, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | James M. Griffin |
The prediction of profile deviations from multi process machining of complex geometrical features using combined evolutionary and neural network algorithms with embedded simulation. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Intell. Manuf. ![In: J. Intell. Manuf. 29(6), pp. 1171-1189, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Changqing Liu, Yingguang Li, Guanyan Zhou, Weiming Shen 0001 |
A sensor fusion and support vector machine based approach for recognition of complex machining conditions. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Intell. Manuf. ![In: J. Intell. Manuf. 29(8), pp. 1739-1752, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Wei Wang 0114, Yingguang Li, Lingling Huang |
Rule and branch-and-bound algorithm based sequencing of machining features for process planning of complex parts. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Intell. Manuf. ![In: J. Intell. Manuf. 29(6), pp. 1329-1336, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Padmakar Jagannath Pawar, Umesh S. Vidhate, Mangesh Y. Khalkar |
Improving the quality characteristics of abrasive water jet machining of marble material using multi-objective artificial bee colony algorithm. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Comput. Des. Eng. ![In: J. Comput. Des. Eng. 5(3), pp. 319-328, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Eugen Krebs, M. Wolf, Dirk Biermann, Wolfgang Tillmann, Dominic Stangier |
High-quality cutting edge preparation of micromilling tools using wet abrasive jet machining process. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Prod. Eng. ![In: Prod. Eng. 12(1), pp. 45-51, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Aude Boudelier, Mathieu Ritou, Sébastien Garnier, Benoît Furet |
Cutting force model for machining of CFRP laminatewith diamond abrasive cutter. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Prod. Eng. ![In: Prod. Eng. 12(2), pp. 279-287, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jin Wang, Zhixin Jia |
Efficiency improvement in electrical discharge machining (EDM) of constant section cavity based on experimental study and numerical calculations. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Prod. Eng. ![In: Prod. Eng. 12(5), pp. 567-578, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Chandra Shekhar 0003, Madhu Jain, Ather Aziz Raina, Javid Iqbal |
Reliability prediction of fault tolerant machining system with reboot and recovery delay. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Syst. Assur. Eng. Manag. ![In: Int. J. Syst. Assur. Eng. Manag. 9(2), pp. 377-400, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Antoni Wibowo |
Hybrid kernel principal component regression and penalty strategy of multiple adaptive genetic algorithms for estimating optimum parameters in abrasive waterjet machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Appl. Soft Comput. ![In: Appl. Soft Comput. 62, pp. 1102-1112, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jun Wu 0012, Yongheng Su, Yiwei Cheng, Xinyu Shao, Chao Deng, Cheng Liu 0004 |
Multi-sensor information fusion for remaining useful life prediction of machining tools by adaptive network based fuzzy inference system. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Appl. Soft Comput. ![In: Appl. Soft Comput. 68, pp. 13-23, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Abdur Rosyid, Bashar El-Khasawneh, Anas Alazzam |
Genetic and hybrid algorithms for optimization of non-singular 3PRR planar parallel kinematics mechanism for machining application. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Robotica ![In: Robotica 36(6), pp. 839-864, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jun Li 0011, Xianghu Meng, Xing Dai |
Collision-free scheduling of multi-bridge machining systems: a colored traveling salesman problem-based approach. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE CAA J. Autom. Sinica ![In: IEEE CAA J. Autom. Sinica 5(1), pp. 139-147, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Hernan Chavez, Krystel K. Castillo-Villar |
Simulation-based model for the optimization of machining parameters in a metal-cutting operation. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Simul. Model. Pract. Theory ![In: Simul. Model. Pract. Theory 84, pp. 204-221, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Zhibo Zhang, Prakhar Jaiswal, Rahul Rai |
FeatureNet: Machining feature recognition based on 3D Convolution Neural Network. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Comput. Aided Des. ![In: Comput. Aided Des. 101, pp. 12-22, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Qianhang Yan, Ming Luo 0005, Kai Tang 0001 |
Multi-axis variable depth-of-cut machining of thin-walled workpieces based on the workpiece deflection constraint. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Comput. Aided Des. ![In: Comput. Aided Des. 100, pp. 14-29, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Alessandra Caggiano |
Tool Wear Prediction in Ti-6Al-4V Machining through Multiple Sensor Monitoring and PCA Features Pattern Recognition. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Sensors ![In: Sensors 18(3), pp. 823, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Luis López-Estrada, Marcelo Fajardo-Pruna, Lidia Sánchez-González, Hilde Pérez 0001, Laura Fernández-Robles, Antonio Vizán |
Design and Implementation of a Stereo Vision System on an Innovative 6DOF Single-Edge Machining Device for Tool Tip Localization and Path Correction. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Sensors ![In: Sensors 18(9), pp. 3132, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Eustaquio García Plaza, Pedro José Núñez López, Elena Maria Beamud González |
Multi-Sensor Data Fusion for Real-Time Surface Quality Control in Automated Machining Systems. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Sensors ![In: Sensors 18(12), pp. 4381, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jun Wang 0057, Jose A. Sanchez, Izaro Ayesta, Jon A. Iturrioz |
Unsupervised Machine Learning for Advanced Tolerance Monitoring of Wire Electrical Discharge Machining of Disc Turbine Fir-Tree Slots. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Sensors ![In: Sensors 18(10), pp. 3359, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Vitalii Ivanov, Jozef Zajac |
Flexible Fixtures for CNC Machining Centers in Multiproduct Manufacturing. ![Search on Bibsonomy](Pics/bibsonomy.png) |
EAI Endorsed Trans. Ind. Networks Intell. Syst. ![In: EAI Endorsed Trans. Ind. Networks Intell. Syst. 4(12), pp. e5, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Qing Xia, Alain Etienne, Jean-Yves Dantan, Ali Siadat |
Reconfigurable machining process planning for part variety in new manufacturing paradigms: Definitions, models and framework. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Comput. Ind. Eng. ![In: Comput. Ind. Eng. 115, pp. 206-219, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | K. Balamurugan, M. Uthayakumar, S. Sankar, U. S. Hareesh, K. G. K. Warrier |
Preparation, characterisation and machining of LaPO4-Y2O3 composite by abrasive water jet machine. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Aided Eng. Technol. ![In: Int. J. Comput. Aided Eng. Technol. 10(6), pp. 684-697, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | P. Krishnakumar, K. Rameshkumar, K. I. Ramachandran |
Acoustic Emission-Based Tool Condition Classification in a Precision High-Speed Machining of Titanium Alloy: A Machine Learning Approach. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Comput. Intell. Appl. ![In: Int. J. Comput. Intell. Appl. 17(3), pp. 1850017:1-1850017:19, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Charles N. MacLeod, Gordon Dobie, Stephen Gareth Pierce, Rahul Summan, Maxim Morozov |
Machining-Based Coverage Path Planning for Automated Structural Inspection. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Trans Autom. Sci. Eng. ![In: IEEE Trans Autom. Sci. Eng. 15(1), pp. 202-213, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Yue Wu, Hai-Tao Zhang, Tao Huang, Gui-Ping Ren, Han Ding 0001 |
Robust Chatter Mitigation Control for Low Radial Immersion Machining Processes. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Trans Autom. Sci. Eng. ![In: IEEE Trans Autom. Sci. Eng. 15(4), pp. 1972-1979, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Hiroshi Saito, Hongjin Jung, Eiji Shamoto, Shinya Suganuma, Fumihiro Itoigawa |
Mirror Surface Machining of Steel by Elliptical Vibration Cutting with Diamond-Coated Tools Sharpened by Pulse Laser Grinding. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(4), pp. 573-581, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Wataru Arai, Fumiki Tanaka, Masahiko Onosato |
Error Estimation of Machined Surfaces in Multi-Axis Machining with Machine Tool Errors Including Tool Self-Intersecting Motion Based on High-Accuracy Tool Swept Volumes. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(5), pp. 680-687, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Eckart Uhlmann, Simon Roßkamp |
Modelling of Material Removal in Abrasive Flow Machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(6), pp. 883-891, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Toshiro Doi |
Next-Generation, Super-Hard-to-Process Substrates and Their High-Efficiency Machining Process Technologies Used to Create Innovative Devices. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(2), pp. 145-153, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Ryuta Sato, Keiichi Shirase |
Geometric Error Compensation of Five-Axis Machining Centers Based on On-Machine Workpiece Measurement. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(2), pp. 230-237, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Keiichiro Watanabe, Tomonori Takahashi, Tomoki Nagae, Hiroyuki Tsuji |
Precision Forming and Machining Technologies for Ceramic-Based Components. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(5), pp. 739-749, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Iker Mancisidor, Xavier Beudaert, Gorka Aguirre, Rafael Bárcena, Jokin Munoa |
Development of an Active Damping System for Structural Chatter Suppression in Machining Centers. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(5), pp. 642-649, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Makoto Fujishima, Takashi Hoshi, Hiroki Nakahira, Masafumi Takahashi, Masahiko Mori |
Machine Tool Service for Mass-Production Machining Systems. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Autom. Technol. ![In: Int. J. Autom. Technol. 12(4), pp. 507-513, 2018. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Jonny Herwan, Seisuke Kano, Oleg Ryabov, Hiroyuki Sawada, Nagayoshi Kasashima |
Cyber-physical system architecture for machining production line. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICPS ![In: IEEE Industrial Cyber-Physical Systems, ICPS 2018, Saint Petersburg, Russia, May 15-18, 2018, pp. 387-391, 2018, IEEE, 978-1-5386-6531-2. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Chao-Lung Yang, Hendri Sutrisno, Nai-Wei Lo, Zhi-Xuan Chen, Ching-Chih Wei, Han-Wei Zhang, Chin-Teng Lin, Chen-Lung Wei, Shang-Heng Hsieh |
Streaming data analysis framework for cyber-physical system of metal machining processes. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICPS ![In: IEEE Industrial Cyber-Physical Systems, ICPS 2018, Saint Petersburg, Russia, May 15-18, 2018, pp. 546-551, 2018, IEEE, 978-1-5386-6531-2. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Wei-chen Lee, Hsu-cheng Cheng, Ching-Chih Wei |
Development of a machining monitoring and chatter suppression device. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICPS ![In: IEEE Industrial Cyber-Physical Systems, ICPS 2018, Saint Petersburg, Russia, May 15-18, 2018, pp. 404-408, 2018, IEEE, 978-1-5386-6531-2. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Woraphrut Kornmaneesang, Shyh-Leh Chen |
Contouring Control of a 5-DOF Dual-Arm Robot for Machining Based on Equivalent Errors. ![Search on Bibsonomy](Pics/bibsonomy.png) |
AIM ![In: 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018, Auckland, New Zealand, July 9-12, 2018, pp. 1349-1353, 2018, IEEE, 978-1-5386-1854-7. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Ali Karim, Emilio Corcione, Julius Jäger, Alexander Verl |
Experimental determination of compliance values for a machining robot. ![Search on Bibsonomy](Pics/bibsonomy.png) |
AIM ![In: 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2018, Auckland, New Zealand, July 9-12, 2018, pp. 1311-1316, 2018, IEEE, 978-1-5386-1854-7. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Cesar R. Ayabaca Sarria, Carlos Vila Pastor |
Assessment of the Sustainability Social Dimension in Machining Through Grey Relational Analysis. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICE/ITMC ![In: 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Stuttgart, Germany, June 17-20, 2018, pp. 1-8, 2018, IEEE, 978-1-5386-1469-3. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Lei Han, Yisheng Zou, Guofu Ding, Menghao Zhu, Lei Jiang, Shengfeng Qin, Hongqin Liang |
Development of an Online Tool Condition Monitoring System for NC Machining Based on Spindle Power Signals. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICAC ![In: 24th International Conference on Automation and Computing, ICAC 2018, Newcastle upon Tyne, United Kingdom, September 6-7, 2018, pp. 1-6, 2018, IEEE, 978-1-86220-341-9. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Shang-Chih Lin, Yu Tsao 0001, Shun-Feng Su, Yennun Huang |
An Industrial IoT Analysis System Based on Machining Data of Metal Materials. ![Search on Bibsonomy](Pics/bibsonomy.png) |
iFUZZY ![In: International Conference on Fuzzy Theory and Its Applications, iFUZZY 2018, Daegu, South Korea, November 14-17, 2018, pp. 225-230, 2018, IEEE, 978-1-5386-7411-6. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Muzaffer Ay, Sebastian Stemmler, Dirk Abel, Max Schwenzer, Fritz Klocke |
System Identification of a CNC Machining Center with Support Vector Machines. ![Search on Bibsonomy](Pics/bibsonomy.png) |
MED ![In: 26th Mediterranean Conference on Control and Automation, MED 2018, Zadar, Croatia, June 19-22, 2018, pp. 891-896, 2018, IEEE, 978-1-5386-7890-9. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Ruizhou Wang, Xianmin Zhang, Ziqiang Yin |
Design and Stiffness Modeling of a Compact 3-DOF Compliant Parallel Nanopositioner for the Tool Servo of the Ultra Precision Machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ROBIO ![In: IEEE International Conference on Robotics and Biomimetics, ROBIO 2018, Kuala Lumpur, Malaysia, December 12-15, 2018, pp. 964-971, 2018, IEEE, 978-1-7281-0377-8. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Yanming Xia, Tao Wang, Lu Song, Xuanyanz Li, Shenglin Ma, Rongfeng Luo, Jing Chen, Wei Wang, Yufeng Jin |
A Study on High Resolution Batch-Mode Micro-Utralsonic-Machining with Constant Feed Force of Sapphire for MEMS Application. ![Search on Bibsonomy](Pics/bibsonomy.png) |
NEMS ![In: 13th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2018, Singapore, Singapore, April 22-26, 2018, pp. 304-307, 2018, IEEE, 978-1-5386-5273-2. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Lingling Li 0003, Li Li 0081, Congbo Li, Ying Tang 0001 |
Energy Efficient Process Planning for Resource-Constrained Machining Systems. ![Search on Bibsonomy](Pics/bibsonomy.png) |
SMC ![In: IEEE International Conference on Systems, Man, and Cybernetics, SMC 2018, Miyazaki, Japan, October 7-10, 2018, pp. 1392-1397, 2018, IEEE, 978-1-5386-6650-0. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Shamil Mamedov, Dmitry Popov 0001, Stanislav Mikhel, Alexandr Klimchik |
Increasing Machining Accuracy of Industrial Manipulators Using Reduced Elastostatic Model. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICINCO (Selected Papers) ![In: Informatics in Control, Automation and Robotics - 15th International Conference, ICINCO 2018, Porto, Portugal, July 29-31, 2018, Revised Selected Papers, pp. 384-406, 2018, Springer, 978-3-030-31992-2. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Leijie Fu, Yv Bai, Zhenyuan Zhong |
Constructing a vertical knowledge graph for non-traditional machining industry. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICNSC ![In: 15th IEEE International Conference on Networking, Sensing and Control, ICNSC 2018, Zhuhai, China, March 27-29, 2018, pp. 1-5, 2018, IEEE, 978-1-5386-5053-0. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Amy J. C. Trappey, Charles V. Trappey, Jack W. C. Wang, Jheng-Long Wu |
An Intelligent Patent Summary System Deploying Natural Language Processing and Machining Learning. ![Search on Bibsonomy](Pics/bibsonomy.png) |
TE ![In: Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0 - Proceedings of the 25th ISPE Inc. International Conference on Transdisciplinary Engineering, TE 2018, Modena, Italy, July 3-6, 2018, pp. 1204-1213, 2018, IOS Press, 978-1-61499-897-6. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Evgenia Selinger, Lars Linsen |
Efficient Curvature-optimized G2-continuous Path Generation with Guaranteed Error Bound for 5-axis Machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
VISIGRAPP (1: GRAPP) ![In: Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (VISIGRAPP 2018) - Volume 1: GRAPP, Funchal, Madeira, Portugal, January 27-29, 2018., pp. 59-70, 2018, SciTePress, 978-989-758-287-5. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Robert Sika, Michal Rogalewicz, Justyna Trojanowska, Lukasz Gmyrek, Przemyslaw Rauchut, Tomasz Kasprzyk, Maria Leonilde R. Varela, José Machado 0002 |
Automatic Assist in Estimating the Production Capacity of Final Machining for Cast Iron Machine Parts. ![Search on Bibsonomy](Pics/bibsonomy.png) |
WorldCIST (3) ![In: Trends and Advances in Information Systems and Technologies - Volume 3 [WorldCIST'18, Naples, Italy, March 27-29, 2018]., pp. 254-263, 2018, Springer, 978-3-319-77699-6. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Nanyan Shen, GengSheng Zhu, Jing Li, Xing Wu, Kai Zhu |
Intelligent Compensation for Machining Error in the Batch Production Based on Automatic Line. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICCAIS ![In: 2018 International Conference on Control, Automation and Information Sciences, ICCAIS 2018, Hangzhou, China, October 24-27, 2018, pp. 411-416, 2018, IEEE, 978-1-5386-6020-1. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Songsong Li, Yong Liu, Zhiyuan Wei |
Experimental Study on Micro Wire Electrochemical Discharge Machining of Ultra Clear Glass with Rotating Helical Tool. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICIA ![In: IEEE International Conference on Information and Automation, ICIA 2018, Wuyishan, China, August 11-13, 2018, pp. 1158-1162, 2018, IEEE, 978-1-5386-8069-8. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Zhili Long, Jianguo Zhang 0002, Qiu Fan, Zengying Zhang |
Energy Prediction for Rotating Ultrasonic Machining Based on Neural Network Model. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICIA ![In: IEEE International Conference on Information and Automation, ICIA 2018, Wuyishan, China, August 11-13, 2018, pp. 832-835, 2018, IEEE, 978-1-5386-8069-8. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Liping Zhao 0002, Feng-Xian Yan, Lu Wang, Yiyong Yao |
Research On Intelligent Evaluation Method For Machining State Oriented To Process Quality Control. ![Search on Bibsonomy](Pics/bibsonomy.png) |
ICMLC ![In: 2018 International Conference on Machine Learning and Cybernetics, ICMLC 2018, Chengdu, China, July 15-18, 2018, pp. 343-347, 2018, IEEE, 978-1-5386-5214-5. The full citation details ...](Pics/full.jpeg) |
2018 |
DBLP DOI BibTeX RDF |
|
12 | Sener Karabulut, Halil Karakoç |
Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Neural Comput. Appl. ![In: Neural Comput. Appl. 28(2), pp. 313-327, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Yujia Luan, Bin Lin 0012, Xingru Ma, Xueming Zhu |
Innovative Contactless Energy Transfer Accessory for Rotary Ultrasonic Machining and Its Circuit Compensation Based on Coil Turns. ![Search on Bibsonomy](Pics/bibsonomy.png) |
IEEE Trans. Ind. Electron. ![In: IEEE Trans. Ind. Electron. 64(10), pp. 7810-7818, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Shou-yan Chen, Tie Zhang, Yanbiao Zou |
Fuzzy-Sliding Mode Force Control Research on Robotic Machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Robotics ![In: J. Robotics 2017, pp. 8128479:1-8128479:8, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Olga Battaïa, Alexandre Dolgui, Nikolai Guschinsky |
Decision support for design of reconfigurable rotary machining systems for family part production. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Prod. Res. ![In: Int. J. Prod. Res. 55(5), pp. 1368-1385, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Shou-yan Chen, Tie Zhang |
Force control approaches research for robotic machining based on particle swarm optimization and adaptive iteration algorithms. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Ind. Robot ![In: Ind. Robot 45(1), pp. 141-151, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Ping Lou, Nianyun Liu, Yuting Chen, Quan Liu, Zude Zhou |
The selection of key temperature measuring points for the compensation of thermal errors of CNC machining tools. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 12(3), pp. 338-350, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Kasinath Das Mohapatra, Rupalika Dash, Susanta Kumar Sahoo |
Analysis of process parameters in wire electric discharge machining of gear cutting process using entropy grey relational analysis approach. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 12(4), pp. 423-443, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Hui Wang, Fuda Ning, Yingbin Hu, Dongping Du, Weilong Cong |
Surface grinding of CFRP composites using rotary ultrasonic machining: design of experiment on cutting force, torque and surface roughness. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 12(4), pp. 461-479, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Dipesh Popli, Meenu Gupta |
Sequential procedure for selecting the ranges of process parameters in rotary ultrasonic machining. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Int. J. Manuf. Res. ![In: Int. J. Manuf. Res. 12(3), pp. 364-378, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Matthias Sabel, Christian Sator, Tarek I. Zohdi, Ralf Müller |
Application of the Particle Finite Element Method in Machining Simulation Discussion of the Alpha-Shape Method in the Context of Strength of Materials. ![Search on Bibsonomy](Pics/bibsonomy.png) |
J. Comput. Inf. Sci. Eng. ![In: J. Comput. Inf. Sci. Eng. 17(1), 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|
12 | Hung-Wei Chiu, Ching-Hung Lee |
Prediction of machining accuracy and surface quality for CNC machine tools using data driven approach. ![Search on Bibsonomy](Pics/bibsonomy.png) |
Adv. Eng. Softw. ![In: Adv. Eng. Softw. 114, pp. 246-257, 2017. The full citation details ...](Pics/full.jpeg) |
2017 |
DBLP DOI BibTeX RDF |
|